Stranica 1 od 1
problem 147
Poslato: Sub Okt 08, 2011 11:26 am
od milan-marko
zlikovci mi sinoc na vozacevoj strani,gurnuli srafciger u cilindar i razvalili ga,nisu nista hvala bogu uzeli iz auta...ali je sada auto na izvolte...moze da se gurne bilo koji kljuc i da se otkljuca auto...da li neko zna kako se skida cela kvaka ili samo cilindar i gde da nabavim novi ili eventualno slepi...
Re: problem 147
Poslato: Pon Okt 10, 2011 6:12 pm
od milan-marko
niko a?
Re: problem 147
Poslato: Pon Okt 10, 2011 8:35 pm
od gile
A da kažeš za početak odakle si, pomoglo bi da ti pomognemo? Ima ona kućica u profilu "Lokacija", nije džabe tamo...
Re: problem 147
Poslato: Uto Okt 11, 2011 9:15 am
od Dragon
Nasao sam nesto na engleskom.
REMOVING THE EXTERNAL HANDLE
10) Pull the weather seal panel gently away from the top right quadrant of the door panel to allow access to the forward retaining bolt of the external door handle. The remainder of the membrane can remain attached. Pull the membrane out of the way and secure loosely using masking tape.
11) Release the handle’s forward retaining bolt with a 10mm socket or spanner by either i) accessing it through hole 'A' shown in (FIG x) or by reaching through the larger hole 'B' to the left. Note: Take care not to drop the nut into the door body.
12) Remove the second bolt on the end of the door using a Philips screwdriver.
The handle is now unsecured but is still attached to the two stays which operate the door opening mechanism and the lock.